Try cutting this adorable cat pattern out of 1/4″ luan
for magnets or 1/2″ – 3/4″ pine wood for mini wood collectibles.

The wood mini mice can be purchased online at Sunshine crafts. Stick the tail in the cat’s
‘mouth’ and glue the bottom of the mouse to the cat using Elmer’s white glue. 

Let dry overnight. Paint this cat in ALL colors- gold – white – black – even blue!

Shown here is a tub with kittens. There is a towel draped over the right  (use a piece or ribbon or cloth for this) then a glued piece of white sculpey clay – for the bar of soap.

Make cat a plywood cutout by enlarging any pattern here. You can use a Pantograph or make your own.

This
cute cat mini has a jute string tail. To do this- knot one end of a piece of jute string. Find jute string in your household dept in the store – or in the crafts section.



Glue the ‘knotted’ end of the tail onto the cat with Elmer’s
glue. Let this dry overnight.

Notice These should be easy cuts- NO DRILLING involved. – Go OUT the same way -you cut IN. Best if 3/4″ pine wood is used with this design. But any thickness of wood will work.

Tie little strings of ribbon around neck. HINT: Gold or silver elastic thread -in the craft section-works well.

Right click on any image to save and download onto your device. Then just size accordingly to the pattern and print. 

REMEMBER: You can click on or right click on any image to save and download onto your device. Then just size accordingly to the pattern and print. 

These original kitty designs below can be cut from 1/2″ – 3/4″ – OR 1/4″ (FOR THIN MAGNETS) 

If cutting 1/2″ pinewood- you can cut up to – 2 – cats /layered at once. 

If cutting with 1/4″ luanwood or birch wood-you can cut up to – 4 – pieces of
design at one time.

REMEMBER:
You can click on or right click on any image to save and download onto your
device. Then just size accordingly to the pattern and print.