For this holiday craft project you will need

​
1) wood slices
2) Modge Podge  sealer
​3) sand paper
​4) sparkles

5) paper print of image below
6) acrylic paints (optional)
7) jute string - to hang as ornaments
8) fridge magnets (if making a fridge magnet)

To begin you will need to lightly sand the front of the wood slice where you will be placing the paper image. 
Next, print out the color sheet of the Christmas scene below. For best results a laser printer will work well when working with Modge Podge glue. Any printing place such as Kinko's will have this type of service.  Read more below:

Instructions continued:
A PDF sheet is provided as a download of the Christmas scene. Cut out the image. Brush an even layer of Modge Podge on the face of the wood piece. Then place the cut image on top, evenly smoothing out the paper right out to the edges. You can use a soft type paper towel to rub on top of the paper making sure there are no air bubbles. Let dry. About 2 - 3 hours. Once dry, paint a thin layer of Modge Podge over the dried paper image. BEFORE the glue dries, (optional) sprinkle a dusting of desired sparkle on the face of the image. Let dry . 
If this is a wood necklace, or an ornament -
​once completely dry, drill a small hole on the top to lace a ribbon, jute string or a chain through.  
​

Wood measurements are approx. 8"w x 9" h